Currently In Stock: 2
KPI Front Knuckle Arm & Hub Carrier Set 18° for MP10
From Yuichi Kanai :
"I will explain the IFW643 part for the Inferno MP-10, which will be released soon. This part was made for the 2024 World Championship. This part sets the kingpin angle on the hub carrier to 7 degrees. The standard for the MP-10 is 0 degrees. This part with the kingpin angle was already standard equipment on the MP-5, which was released in 1995. I thought of and designed this hub carrier with a kingpin angle exactly 30 years ago in 1995. At that time I studied kingpin angles a lot. Then I adopted it and sold it on the MP-5 to MP-777. The MP-5 was the first in the world to use a kingpin angle on a 4WD hub carrier system. By the way, the MP-5 was also the first in the world to add an 8-degree skid angle to the tip of the chassis. The kingpin angle was eliminated from the subsequent model, the MP-9. And since the 2024 World Championship venue is high grip, I made it with a kingpin angle again and used it in the World Championship. This part is a setting part, and depending on the track, it can be milder when exiting corners or in chicanes. The characteristics of the knuckle can be changed by replacing the 0.5 mm washer up and down. The characteristics can be changed by moving the hub carrier forward and backward within 3 mm. 3 mm, 2 mm, and 1 mm washers are included."