*These Bodies are the new Genuine Salvas 2020 Body. We keep them in stock and ready to ship!

Check out our pre-printed wraps!

Check out some of the common items people order with a Salvas Body:

Traxxas Slash 2WD 58024

Traxxas Rustler Front Bumper

Factory Xtreme Mud Boss Battery

Body Mount Posts:

1.5" Inch Body Mount Post

2" Inch Body Mount Post

2.5" Inch Body Mount Post

3" Inch Body Mount Post

3.5" Body Mount Posts

QUICK LINKS!

RULES
http://www.tqcells.com/.../2020-SALVAS-MUDboss-rules.pdf...

RÈGLEMENTS
http://www.tqcells.com/.../REGLEMENTS-2020-SALVAS-MUDboss...

SETUPS (carpet)
https://www.facebook.com/SalvasMUDboss/posts/993197894183675

USEFULL INFOS

(how to assemble a body)
https://www.facebook.com/watch/?v=3522620791093871

(How to « real complete infos » from an article made by rctruckstop.com)

http://rctruckstop.com/.../traxxas-dirt-oval-racing-mudboss/

(how to "pin" a servo saver or bellcrank)
https://www.facebook.com/media/set/...

(how to "adapt" a traxxas Slash 2wd to a MUDboss)
https://www.facebook.com/SalvasMUDboss/posts/404973899672747

(info video)
https://www.youtube.com/watch?v=M4P_25NIQlE...
Salvas Mud Boss Rules 2020:
2020 SALVAS MUDboss CLASS rules (effective may 1st 2020) 1 Salvas MudBoss BODIES only 1.1 - Any minor modification to the body must be approved before being allowed 2 CHASSIS 2.1 - TRAXXAS 2wd (SLASH or RAPTOR) chassis only 2.2 - Original MFG suspension parts only, no other parts allowed (such as from RPM) 2.3 - Original MFG chassis parts only, no aftermarket hop-ups, no optional aluminium parts 2.4 - Front bumper, right side bumper and front body post brace must be removed 2.4.1 - Left side and rear bumpers can also be removed (if desired) **rear RPM bumper is allowed** 2.5 - TRAXXAS front optional bumper (TRA2735) can be used (angled down) 2.6 - Major alterations to the chassis or modification to drivetrain/suspension components is not allowed 2.7 - Electronics (rx/esc/amb) must be installed within chassis surface (no outside installation) 2.8 - Battery brace can be trimmed to allow different LiPo battery wire configuration 3 ELECTRONICS 3.1 - Original TRAXXAS 2075 servo 3.2 - TRAXXAS 2075x (servo) AND TRAXXAS 2072x (gears) are allowed as ‘alternative’ parts/servo 3.2.1 - The “SAVOX SC-0252MG Digital Servo” is allowed, this is an ‘alternative’ servo 3.2.2 - SAVOX gear set (SAVSGSC0251MG) can be used to ‘upgrade’ the TRAXXAS 2075 to metal gears 3.3 - it is allowed to 'pin' the servo saver(white) or bell crank(black)...be advised the servo gears might get broken under a heavy crash!!! 3.3.1 - original TRAXXAS plastic servo saver/bell crank only (white or black system) it is allowed to mix the components (ie.. black servo horn with white bell crank) 3.3.2 - It is allowed to use a solid (one piece) servo horn (any brand) 3.4 - 2-cell 7.4v LiPo battery with a maximum of 5200mah and 50c, with external plug only (no “bullet type” connector) 4 ADJUSTMENTS 4.1 - TRAXXAS 76/83/86/90 spur with all transmission parts in place (slipper) 4.2 - Any pinion size 4.3 - No modifications can be made to the transmission’s case (ie.. to allow a bigger gear ratio) 4.4 - The gear cover must be off at all times to allow for visual inspection (CARPET)...and removed if asked (DIRT) 4.5 - The only adjustments allowed to the car are those allowed by the original MFG components of the car 4.6 - You are allowed to use any original wheel spacer combination (Black, Grey or any combination of both types) 4.7 - Transmission functionality rule (motor can not spin while turning slowly one rear wheel a full turn) 4.8 - Traxxas SLASH *STEEL* transmission gears only (internal plastic transmission gears not allowed) 4.9 - Adding weight (in any way) is not allowed, wheel balancing is allowed (sole purpose of balancing, not to add weight) 5 SUSPENSION 5.1 - TRAXXAS 2WD plastic shocks only (grey or black version) (fronts in front, rears in rear) 5.2 - Original Rear(TRAXXAS 5858) and Front springs (TRAXXAS 5857) (no LCG kit springs or aftermarket springs) 5.3 - Front springs may be cut in order to shorten them (no more than 5 round removed on ONE end) 5.4 - The shock’s travel may be shortened with internal shims (ie..fuel tube or solid shims...) 5.5 - Original shafts in original cylinder (length and type in proper cylinder) 5.6 - Original pistons from kit only (original 1,2 or 3 hole), no modifications can be made to them 5.7 - No front bump stop suspension, a single original blue bump stop can be used per rear shock (not mandatory) 5.8 - No shimming allowed (to reduce slop in suspension parts) 5.9 - All suspension parts (such as A-Arms) must remain in original positions it was designed for (no swapping left to right) 5.9.1 - rear camber links must remain in original height position (upper hole on shock tower not allowed) 6 CARPET OVAL (SMALL BLOCK CLASS) SPECIFIC RULES 6.1 - TRAXXAS Low CG chassis is allowed 6.2 - ROAR legal 17.5 sensored brushless motor (Stock 17.5 / Spec) http://roarracing.com/approvals/print_brushlessmotors.php (approval date is set to May 1st 2020) 6.3 - spec SPEED CONTROLLER (no timing (boost) option possible....ie TEKIN SPEC, HW Justock, NOVAK GTB(#)/Edge...or any other ESC that has no timing (boost) profile available) 6.4 - JACO tires (JAC2055LP) only **can be trued**(must keep its FULL WIDTH, it is allowed to round the edges) 6.5 - Plastic Wheel cap are allowed with a max dia of 3.125” and must be secured with a min of 2 screws/wheel 6.6 - You may use a bead of “CA” type glue or ‘’tape’’ to the RIGHT FRONT tire side wall to reduce the car’s aggressiveness 6.7 - ODORLESS tire additives only (ie..SXT, J-DUB…) 6.8 - all other rules specified earlier in sections 1-2-3-4-5 stays the same 7 CARPET OVAL (BIG BLOCK CLASS) SPECIFIC RULES 7.1 - TRAXXAS Low CG chassis is allowed 7.2 - ROAR legal 13.5 sensored brushless motor (Stock 13.5 / Spec) http://roarracing.com/approvals/print_brushlessmotors.php (approval date is set to May 1st 2020) 7.3 - a single 30mm motor fan can be used 7.4 - any ESC in BLINKY mode (ROAR approved) 7.5 - JACO tires (JAC2055LP) only **can be trued**(must keep its FULL WIDTH, it is allowed to round the edges) 7.6 - Plastic Wheel cap are allowed with a max dia of 3.125” and must be secured with a min of 2 screws/wheel 7.7 - You may use a bead of “CA” type glue or ‘’tape’’ to the RIGHT FRONT tire side wall to reduce the car’s aggressiveness 7.8 - ODORLESS tire additives only (ie..SXT, J-DUB…) 7.9 - all other rules specified earlier in sections 1-2-3-4-5 stays the same 8 DIRT OVAL (SPORTSMAN CLASS *ROOKIE*) SPECIFIC RULES 8.1 - TRAXXAS SLASH or RAPTOR original chassis only (no LCG) 8.2 - any original TRAXXAS SLASH rubber tire/wheel/inserts (BFG / KUMHO / SPEC) any wheel combination of the SAME TIRE TYPE (ie..4 fronts, 4 rears, 3 front 1 rear…) *NO “S1” compound* 8.3 - Tire surface must show “thread Pattern” (no slick tires) 8.4 - No tire traction additives, Only a soft cleaner can be used for the sole purpose of cleaning the tire (ie..Simple Green) 8.5 - TRAXXAS 12t brushed motor AND XL5 esc ONLY (OEM motor connector only) 8.6 - **GEAR RULE 16/90** 8.7 - driver eligibility to be approved by local race committee (it is a BEGINNER’S class) 8.8 - all other rules specified earlier in sections 1-2-3-4-5 stays the same 9 DIRT OVAL (SPORTSMAN CLASS) SPECIFIC RULES 9.1 - TRAXXAS SLASH or RAPTOR original chassis only (no LCG) 9.2 - any original TRAXXAS SLASH rubber tire/wheel/inserts (BFG / KUMHO / SPEC) any wheel combination of the SAME TIRE TYPE (ie..4 fronts, 4 rears, 3 front 1 rear…) *NO “S1” compound* 9.3 - ODORLESS tire additives only (ie..SXT, J-DUB…) 9.4 - Tire surface must show “thread Pattern” (no slick tires) 9.5 - TRAXXAS 12t brushed motor AND XL5 esc ONLY (OEM motor connector only) 9.6 - all other rules specified earlier in sections 1-2-3-4-5 stays the same 10 DIRT OVAL (SMALL BLOCK CLASS) SPECIFIC RULES 10.1 - TRAXXAS SLASH or RAPTOR original chassis only (no LCG) 10.2 - TRAXXAS SLASH “SPEC” rubber tire/wheel/inserts only, any wheel combination of those (ie..4 fronts, 4 rears, 3 front 1 rear…) (part# TRA5863-64-71-73-75) *NO ”S1” compound* 10.3 - No tire traction additives, Only a soft cleaner can be used for the sole purpose of cleaning the tire (ie..Simple Green) 10.4 - Tire surface must show “thread Pattern” (no slick tires) 10.5 - ROAR legal 17.5 sensored brushless motor (Stock 17.5 / Spec) http://roarracing.com/approvals/print_brushlessmotors.php (approval date is set to May 1st 2020) 10.6 - spec SPEED CONTROLLER (no timing (boost) option possible....ie TEKIN SPEC, HW Justock, NOVAK GTB(#)/Edge...or any other ESC that has no timing (boost) profile available) 10.7 - all other rules specified earlier in sections 1-2-3-4-5 stays the same 11 DIRT OVAL (BIG BLOCK CLASS) SPECIFIC RULES 11.1 - TRAXXAS Low CG chassis is allowed 11.2 - PROLINE #10153 HOOSIER M3 or M4 with oem blue inserts (any SC wheel) 11.3 - Tire surface must show “thread Pattern” (no slick tires) 11.4 - ODORLESS tire additives only (ie..SXT, J-DUB…) 11.5 - any ESC in BLINKY mode (ROAR approved) 11.6 - ROAR legal 13.5 sensored brushless motor (Stock 13.5 / Spec) http://roarracing.com/approvals/print_brushlessmotors.php (approval date is set to May 1st 2020) 11.7 - a single 30mm motor fan can be used 11.8 - all other rules specified earlier in sections 1-2-3-4-5 stays the same ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// ***anything not mentioned in the above rules will not be allowed, or must be approved beforehand*** RULES ARE SIMPLE, THIS CLASS IS MEANT TO BE ‘SPEC’ AND ALLOWS FOR CLOSE COMPETITION ON EQUAL GROUNDS FOR ALL. THIS CLASS IS ALSO MEANT TO SHOWCASE THE BEST DRIVER AND ALLOW FOR FUN! NO SECRETS OR ‘VOODOO’. IF YOU WANT TO HIDE YOUR CAR OR RUN SOMETHING THAT COMPETITORS CAN’T RUN, THIS IS NOT THE CLASS FOR YOU. IF YOU WANT TO HAVE FUN IN A CLASS WHERE DRIVER AND SETUP ABILITY IS KING, YOU HAVE FOUND THE RIGHT DIVISION.

JConcepts 0374 F2 Clear Body w/ Spoiler : Rustler VXL